Yukon Duragrip is a performance differential designed to improve vehicle traction and stability. However, some issues with the Yukon Dura Grip can cause a lot of problems for many. Being able to identify the different types of Yukon Dura Grip problems is essential in order to take the necessary corrective action.
In this article, we will discuss the most common Yukon Dura Grip problems along with their solutions.
The Common Problems of Yukon dura grip
Yukon Dura Grip is a type of differential manufactured by the Yukon Gear and Axle company. It is a popular choice among off-roaders, as it is designed to provide improved traction and stability in difficult terrain.
However, like many mechanical components, the Yukon Dura Grip is not immune to problems. Here are some common issues that you may encounter with this differential:
Leaking Seals
One of the common Yukon dura grip problems is leaking seals. If the seals on your Yukon dura grip start to leak, it can cause all sorts of other problems. The bearings can become loose, the parts can corrode, and the machine can overheat.
There are a few things you can do to stop your seals from leaking. Make sure the seals are properly aligned and that there is no dirt or grime blocking them. You can also apply some sealant or lubricant to help keep them in good condition. If none of these solutions work, you may need to replace the seals entirely.
Loose Bearings
Your Yukon dura grip may experience problems with loose bearings. This means that the bearings within the tool become loose and start to move around, which will ultimately affect the performance of the tool. There are a few things you can do to help prevent this from happening:
- Keep the tool clean and free of dirt and debris
- Make sure that all of the parts are properly lubricated
- Be careful not to overload the tool or use it for longer than its intended use
Corroded Parts
Parts of the Yukon dura grip can corrode when they’re not properly lubricated. This can cause the seals to leak, the bearings to loosen, and the entire tool to overheat.
If you’re noticing any of these problems with your Yukon dura grip, it’s important to take action right away. The first step is to lubricate all of the moving parts with a quality lubricant. You can buy a lubricant specifically designed for tools like this, or you can use a household lubricant like WD-40.
If the problem persists, you may need to replace the corroded parts. You can find replacement parts online or at your local hardware store. Be sure to read the instructions carefully before replacing any parts, and always use caution when working with tools.
Incompatible Parts
Another common issue with a Yukon dura grip is that of incompatible parts. This happens when the wrong part or a part designed for another car is used instead.
For example, many people find that they’ve installed the wrong axle and then discover that it’s incompatible with their vehicle and causes problems. Unfortunately, this can be a relatively costly mistake to fix as you’ll have to replace the incorrect part with one compatible with your car.
To avoid this, you should ensure that any parts you buy are specifically designed for your vehicle by checking the manufacturer’s part numbers or contacting the manufacturer directly to confirm compatibility before making any purchases.
Poor Lubrication
Another problem with Yukon Dura Grip is poor lubrication. This is a common issue, as the parts of the unit often need to be kept well-lubricated in order to prevent corrosion, friction, and other types of wear and tear. If you don’t keep your Yukon Dura Grip unit properly lubricated, it could lead to a number of different problems.
To prevent this from happening, you should make sure that all components are regularly checked for signs of poor lubrication. If you do find any issues, then it’s important to address them right away. You can use a synthetic oil or grease specifically designed for the Yukon Dura Grip unit to help keep everything well lubricated and functioning properly.
Overheating
Have you noticed that your Yukon Dura Grip is running hot? This is usually caused by a buildup of heat, which can be caused by a few different things. Firstly, the lube in the differential may have broken down which can cause friction and heat to build up. Secondly, there could be too much gap between the ring gear and pinion gear which will also cause heat to build up. Lastly, the driveshaft may need balancing which could also cause the differential to overheat.
To fix this problem you will need to replace the lube in your differential, make sure there is proper contact between the ring gear and pinion gear and get your driveshaft balanced if necessary. Once these problems have been addressed you should no longer experience overheating issues with your Yukon Dura Grip.
FAQs
How does Yukon Dura grip work?
Yukon Dura Grip is a traction aid designed to improve vehicle performance in slippery conditions such as snow, mud, and sand. It uses a series of steel chains connected to a drive sprocket that is mounted on the differential housing. When the power is applied to the drive sprocket, the chains are pulled tight and pressed against the drive tires. This increases the contact area between the tire and the road surface, allowing for improved traction and control.
How do you use a Dura Grip?
To use a Dura Grip, start by ensuring it is securely attached to the desired surface. Make sure that the Dura Grip is securely fastened to the surface by firmly pressing the adhesive backing against the surface. Once the Dura Grip is attached, the user can use it to securely hold objects such as tools and other items.
What is the difference between Yukon Dura Grip and Grizzly Locker?
The Yukon Dura Grip is a limited-slip differential that uses varying amounts of clutch pressure to limit axle slippage. This allows for better control in cornering and acceleration. The Grizzly Locker is a complete locking differential. This locks the axles completely together, forcing both wheels to turn at the same speed. This is beneficial for off-roading, but can cause excessive tire wear on the road.
Conclusion
Yukon Dura Grip is a reliable and durable differential carrier assembly designed to increase traction, improve handling and reduce rear-end noise. However, due to improper installation or lack of maintenance, the Yukon Dura Grip can suffer from various problems but it is important to ensure that it is properly installed and properly maintained to prevent these problems from occurring. Thanks for reading this Yukon dura grip problem.