Lomax Tonneau Cover problems & troubleshooting

Have you noticed that your Lomax Tonneau Cover isn’t closing as smoothly as it used to? Or are you noticing signs of wear and tear on your cover that worry you?

The truth is, Lomax Tonneau Cover problems can occur after extended use. And if left unaddressed, these problems can lead to serious and costly damage.

This is why it’s important thing to consider those issues to solve them as soon as possible. But before that, you need to know some of the common issues that arise with Lomax Tonneau Cover.

If you don’t have any idea about its common issues; we can help you. In this article, we’ll try to share some of its key problems and their solutions as well. We’ll also share some tips so that you can maintain it and extend its life.

So, why late? Keep reading this article and gain some ideas.

6 Common Lomax Tonneau Cover Problems with Solutions

Lomax Tonneau Cover is a popular choice for truck owners who are looking for a reliable and stylish way to protect their cargo.

But it can experience problems from time to time. Here, we’ll try to share some key problems with Lomax Tonneau Cover and their solutions as well.

Difficulty in Opening or Closing

If you’ve been having difficulty opening or closing your Lomax Tonneau Cover, it can be a major problem.

But there is nothing to worry about. There are some easy solutions that can help you fix this issue.

First and foremost, check the locking mechanism to make sure it is still fully functional. If the locking mechanism remains unresponsive after this check, then adjust the tension on the clamp by loosening the loud catches on either side.

It can cause the latch to be loose and may eventually need replacing if it continues to happen.

Next, lubricate any areas where the locking mechanism is not working correctly, as well as any area where contact with the tonneau cover occurs.

You can use white lithium grease for this; it should only take a few minutes and will help ensure that your cover opens and closes with ease.

Finally, if these steps don’t work, then it’s time to call in a professional who may need to replace some of the parts of your Lomax Tonneau Cover.

Once they are replaced, your truck should open and close without any further difficulty.

Water Leaking

The Lomax tonneau cover is known for its great waterproofing abilities, but the issue of water leaking can still arise.

If you find that the tonneau cover is leaking water, first check to make sure that the cover is properly fitted and sealed. If not, adjust it according to the manufacturer’s instructions.

It’s also possible that the problem could be with dirty or damaged seals. In this case, you’ll need to either clean or replace them as needed.

Once everything looks good, try using a silicone sealant to re-seal the edges and corners of your tonneau cover. It helps to keep the water out and keep your cargo dry.

Poor Fitting

Do you find yourself having trouble with your Lomax Tonneau Cover’s fitting? You might be having a poor fitting issue.

This can come from either installing the tonneau cover too tightly or having an uneven surface on your truck bed.

Don’t worry! There are a few fixes you can try to solve this issue.

Adjust The Covers Tension

If the cover is too tight, you can adjust the tension of the cover by loosening or tightening the side lock straps until it fits snug.

Make sure to check all four corners for any signs of tension, as this will give you an idea of how tight to make it.

Secure The Latch

Sometimes, the latch may also be contributing to poor fitting so check that all latches are properly secured and working properly. If it is still not holding, try re-adjusting the tension of the latch to get a better fit.

Check The Truck Bed

Look at your truck bed and make sure that everything is even and level. If there is any damage or unevenness, this could cause poor fitting of your tonneau cover. So, check everything thoroughly before reinstalling your tonneau cover.

These are a few simple ways to help fix any issues with poor fitting on your Lomax Tonneau Cover so you can get back out on the road!

Bad Noise

Does your Lomax tonneau cover make a lot of noise when you drive? This is common, and it’s called wind whistle or lift.

It’s caused by air entering the gap between the tonneau cover and your truck’s bed, and it can be an annoying problem.

But the solution is simple: add some form of insulation. You can use rubber gaskets or weatherstripping to fill gaps. Also, get an aftermarket kit complete with foam seal blocks, self-adhesive foam strips, and waterproof tape.

But if this doesn’t work or if you’re getting another kind of noise, there could be two other culprits:

  • The latch is faulty. Check that all mounting screws are tight and there’s no debris on the latch to cause rattle noise.
  • The seals are not properly set up. Make sure the seals are correctly aligned so there are no gaps that cause noise.

Whatever kind of noise you’re dealing with wind whistle or something else, it’s best to get a pro to check out your tonneau cover for any issues that could be causing it.

They’ll be able to locate any parts that may need replacing for a more peaceful ride.

Loose Grip

One of the key problems of the Lomax Tonneau Cover is that it can often be difficult to pull open or close because of a loose grip.

To try and fix this, there are a few different solutions you can use.

Adjusting the tension

Sometimes, it’s beneficial to adjust the tension on the current tonneau cover. To do this, locate the tensioners and turn them clockwise to make the latch more secure.

If you don’t have one installed already, you should get one as they help increase tension and secure a tighter fit.

Installing a gas strut

Another way to help make your tonneau cover easier to open or close is to install a gas strut. Gas struts help apply pressure evenly across the entire cover.

It means that when it’s closed, everything will remain tightly sealed. This can also help reduce noise from wind turbulence, which is always welcome!

Replacing old parts

If these techniques don’t work, then it might be worth replacing any older parts with new ones. This could include replacing rubber seals or door hinges that may have become worn over time leading to an increased difficulty in opening and closing your tonneau cover reliably.

The Latch Pops Out While Driving

Another common problem associated with the Lomax Tonneau Cover is that it has been known to pop open while driving.

This can be both irritating and dangerous. The good news is that it is a fixable problem, and there are several solutions that you can try:

Tighten it securely

Check to make sure that the latch is tight and secure. If it is not, use the screwdriver to tighten it until the lid stays firmly closed.

Make sure to read the cover’s instructions carefully so you know how to tighten it correctly.

Add an extra latch

If one latch isn’t enough, consider adding an extra one for extra security. This will help keep your cover closed even when you’re driving at high speeds or in rough terrain.

Install rubber strips

Rubber strips installed between the lid and frame can help create a better seal. It prevents air from entering the space under the lid. Also, it helps to reduce any strength on the latch. This makes it less likely to pop open while driving.

Don’t overload the bed

Be mindful of what you are loading into your truck bed. Overloading your truck bed with too much weight can place more stress on your tonneau cover latches leading them to pop open while driving.

Keep in mind that each tonneau cover has a specific weight capacity and make sure not to exceed this limit when loading items into your truck bed.

Why It Is Important to Determine Lomax Tonneau Cover Problems

Maintaining your Lomax tonneau cover is critical for having an efficient, safe, and secure vehicle.

It is important to determine any problems with your Lomax tonneau cover as they can lead to costly repairs. They can also lead to further damage to the vehicle if left unaddressed.

It is therefore important to inspect your Lomax tonneau cover on a regular basis. Look carefully for signs of wear or tear that could indicate an underlying problem with your Lomax tonneau cover.

Keeping an eye out for these signs can help you identify any potential issues before they become a larger and more expensive problem down the line.

Tips to Maintain Your Lomax Tonneau Cover

Maintaining your Lomax Tonneau Cover is essential if you want to keep it in peak condition.

It can save you from the hassles of frequently replacing it and will help ensure that it lasts for a long time.

Here are some tips on how to keep your cover in great shape:

  • Make sure to often inspect the cover for any signs of wear and tear, such as cuts, tears, and cracks.
  • Check the seals around the edges to ensure that they are still secure.
  • Be sure to use a soft cloth when cleaning the cover – harsh scrubbing can damage it.
  • Use a water repellent or silicone sealant to maintain its water resistance.
  • Avoid storing objects on top of the Lomax tonneau cover as this could cause dents or scratches.
  • Regularly lubricate all moving parts such as hinges and latches with waterproof grease.

These simple tips can help you keep your Lomax tonneau cover in peak condition. So, be sure to give them a try.

How to Extend Lomax Tonneau Cover Life

When it comes to keeping your Lomax Tonneau cover in tip-top condition, it pays to know the basics.

Here are some important tips that will help extend the life of your tonneau cover and keep it looking like new:

  1. Regularly clean and check your Lomax Tonneau cover, paying extra attention to the seals, clamps and hardware. Use a mild soap and water solution; never use harsh chemicals or abrasives on the cover.
  2. When driving in cold weather, make sure to have a good fitting tarp over your Lomax Tonneau cover to keep moisture or snow out.
  3. Remove snow accumulation from on top of the tonneau cover when possible in cold weather regions.
  4. Reapply silicone sealant every 3-4 months around the edges of the tonneau for extra protection against dirt and road debris getting in and damaging the material underneath.
  5. Inspect for any signs of wear and tear, including cracks, punctures or tears that could weaken your tonneau’s structure over time if not taken care of properly.

Taking these steps can make sure that you can get the most out of your Lomax Tonneau Cover for years to come.

What is the Average Servicing Cost for Lomax Tonneau Cover

Although the Lomax Tonneau Cover is a durable product, it still needs periodic servicing to ensure that it lasts as long as possible.

To keep your Lomax Tonneau Cover in tip-top shape, you will need to invest in regular maintenance, inspection and repair.

The average servicing cost for a Lomax Tonneau Cover can vary depending on the type of maintenance and repair needed.

Usually, you can expect to pay anywhere from $50-$200 for regular maintenance and inspection. If repairs are needed, then repairs may cost anywhere from $300-$800 depending on the parts and labor required.

It’s important to remember that regular servicing can help you avoid costly repairs down the line by catching any potential issues before they become bigger problems.

Regular inspections of your cover are essential to maintaining its lifespan. Many companies also offer warranties with their covers. It can help to defray the cost of any repairs that might be needed down the line.

Final Thought

Lomax Tonneau Cover Problems vary from person to person and vehicle to vehicle. But by understanding the signs of a problem, taking preventive measures, and understanding when to get it serviced or replaced, you can stay ahead of any potential issues.

With the right maintenance, care, and preventive measures, you can keep your Lomax Tonneau Cover in great shape and make sure that it lasts you for many years to come.

So, don’t let them creep up on you and make sure to stay on top of your cover’s maintenance schedule. That way, you can continue to fully enjoy the convenience and security of your Lomax Tonneau Cover.


Leave a Reply