It’s no secret that Bak Revolver X4S is a popular choice for truck bed covers. The slick design added security features, and ease of use make it a go-to for any serious trucker.
Like any piece of equipment, it’s important to be aware of potential issues that may arise with your Bak Revolver X4S. It will help you to know how to respond in the event something does happen.
We’re going to share some of the major Bak Revolver X4S problems with their solutions as well. If you’re new to owning one or just looking for more tips, you should have a look at this article.
So, why late? Keep reading this article and gain some ideas.
Why It’s Important to Diagnose Bak Revolver X4S Problems Early?
Diagnosing problems with your Bak Revolver X4S tonneau cover early on is crucial in maintaining its optimal performance.
Early diagnosis allows for quick and effective repairs. It prevents minor issues from becoming major problems that may require costly replacement of parts or the entire cover.
By diagnosing problems early, you can ensure that your cover continues to function properly and provide the necessary protection for your cargo.
Regular maintenance and inspection can help identify issues before they become major problems.
It will ensure that your Bak Revolver X4S cover remains in excellent condition for years to come.
Common Bak Revolver X4S Problems – with Solutions
No doubt that the Bak Revolver X4S is a popular hard rolling tonneau cover. It is designed to provide truck owners with a secure and reliable way to protect their cargo.
However, it can also face some problems that you might need to know. Here, we’ll share some of its common issues with their solution. So, please check it out.
Leaking
One of the most common issues with the Bak Revolver X4S is leaking. It’s something that can be easily fixed in most cases.
The most common causes of leaking are improper installation, using the wrong type of lubricant, or a damaged O-ring.
But don’t worry! All of these issues can be resolved easily and quickly. Here’s how to fix each:
- Improper Installation: If you’ve recently taken apart your Bak Revolver X4S and put it back together incorrectly, you may have created an air leak that’s causing the issue. To fix this, take the gun apart again and make sure everything is installed correctly according to the manufacturer’s instructions.
- Wrong Lubricant: If you’re using a low-quality silicone lubricant or another type of lubricant that isn’t specifically designed for use with your Bak Revolver X4S, it may be causing a seal leak. To resolve this issue, make sure you’re using a high-quality silicone lubricant designed for use with your gun.
- Damaged O-Ring: Finally, if your O-ring is damaged or has worn out over time, it could be causing a seal leak in your gun. To fix this, replace the O-ring with one made by the same manufacturer as your gun and use the right kind of silicone lubricant.
Difficulty Opening or Closing
If you’re having difficulty opening or closing your Bak Revolver X4S, it’s likely due to a few possible issues.
First, make sure that it’s properly lubricated and that all the screws are tightened.
If hard starting is still occurring, there might be an internal issue with the lock release plunger. In this case, you’ll need to disassemble the safe to have a look.
For detailed instructions on how to open a Bak Revolver X4S that’s stuck closed:
- Start by turning the handle up and away from the open position.
- Lift up slightly on the frame of the safe while pressing inward on the body of the safe slightly. This will help disengage any binding in the lock release plunger assembly.
- Once disengaged, turn your handle back toward its normal open position and work it back and forth at least three times. This should free up your safe so it can be opened fully.
For a Bak Revolver X4S that’s sticking in the open position, try one of two solutions:
- Add some additional lubrication around the entire lock release plunger assembly and then work your handle back and forth several times to give it some slack.
- Alternatively, you could remove any binding material from around the lock release plunger itself using a small pick or similar tool. Again, this should allow for more natural movement when opening and closing your safe.
Rattling Noises
Do you hear a rattling sound coming from your Bak Revolver X4S? If so, don’t ignore it because it can be a sign of a bigger problem. The first step is to try and diagnose the source of the noise. Here are two possible sources:
Loose Parts
The most common culprit is loose parts, such as screws, nuts, and bolts that have come loose over time. The rattling sound comes from the movement of these components within the Bak Revolver X4S.
If you suspect this is the source of the rattling sound, then a quick inspection should help you to identify any loose parts that need to be secured.
Worn Parts
Not all rattling noises indicate an issue with loose parts. If you’ve inspected for these but can’t find anything, then the noise might be coming from worn out components in need of repair or replacement.
This is especially true if your Bak Revolver X4S is older and has been well-used over time. In this case, it’s best to consult a professional gunsmith who can determine what needs replacing and carry out any repairs required.
No matter why your Bak Revolver X4S is making a rattling noise, it’s important to diagnose and address the issue as soon as possible to ensure its optimal performance and reliability for years to come.
Sticking Plunger or Cylinder
Sometimes, the Bak Revolver X4S might have an issue where the plunger or cylinder is sticking. This can be caused by numerous factors like dirt, debris, or wear and tear of the internal mechanism of your pistol.
Don’t worry though. Here are few troubleshooting tips that could get you back in business:
Clean it Out
The first thing you should do is clean out all internal parts of your revolver with a cleaning kit and lubricant. This should fix some of the issues with stuck plungers or cylinders if they are caused by dirt buildup.
Check the Springs
If cleaning out your revolver didn’t take care of it, then you’ll need to check the springs for smooth operation. Make sure that all springs, including trigger, hammer and plunger spring, are not sticking or getting jammed up when fired.
Look for Corrosion
Corrosion can cause malfunctioning of any firearm. So, make sure there’s no corrosion on any of the internal components and clean it out with a contact cleaner to remove any corrosion from your gun.
Check for Firing Pin Blockage
The firing pin on a revolver serves as a safety feature that prevents accidental firing when not in use. When this pin is blocked or sticks in place, it can cause your revolver to jam up and malfunction.
If this is what’s causing your issue, simply release tension on the cylinder hand pressure by taking it apart and cleaning any blockages or debris inside.
Premature Wear and Tear
No matter how well you maintain your Bak Revolver X4S, it’s inevitable that parts of it will eventually break down over time.
But many times, premature wear and tear can be caused by improper use or maintenance.
So, let’s look at some steps you can take to ensure a long life for your Bak Revolver X4S.
Regular Maintenance
Regular maintenance is key to avoiding premature wear and tear. Try to do a once-over of the entire Bak Revolver X4S every month or so.
It’s important to make sure all screws and nuts are in place, there is no debris build up, and all parts are in working order. This will help prevent any wear and tear from happening too quickly.
Proper Use
When operating the Bak Revolver X4S, make sure you are using the proper form. It includes holding the revolver with both hands while pulling the trigger in an even manner.
Also, be mindful of where you point the firearm. Always keep it pointed away from yourself and others when shooting.
Security Issues
Safety is always a big concern when you’re dealing with firearms, and the Bak Revolver X4S is no exception.
If you’re having security issues with your revolver, here are some of the most common solutions to help keep it safe from any unauthorized users.
Safety Lock
The Bak Revolver X4S is equipped with a safety lock to make sure that only authorized users can access and use it.
To engage the safety lock, simply slide the cylinder open and insert the key provided when you bought the gun into the latched handle on the back of the gun. The cylinder will now be locked in place.
If you want to disable this feature, just turn the key counterclockwise until it clicks back into place.
Cylinder Rotation Limiter
The cylinder rotation limiter prevents someone from excessively spinning or otherwise tampering with the cylinder of your Bak Revolver X4S.
To engage this feature, move the small knob located on the left side of your revolver’s frame below its grip panel until you feel a slight click.
This will prevent anyone from opening up or spinning your cylinder without your knowledge or consent.
Trigger Lock
Lastly, there’s also an adjustable trigger lock that comes included with your Bak Revolver X4S for extra safety measures.
It can be engaged by simply pressing down on one of two buttons located at either side of your revolver’s frame above its trigger guard and then turning them counterclockwise until they click in place.
This locks your trigger and prevents anyone from being able to fire your weapon without consent.
6 Maintenance Tips to Prevent Bak Revolver X4S Issues
The Bak Revolver X4S is a popular tonneau cover that provides excellent protection to your truck bed while enhancing its appearance.
However, like any other vehicle component, the Bak Revolver X4S may develop problems over time if not properly maintained.
Here are some maintenance tips to prevent Bak Revolver X4S problems and ensure that it remains in good condition:
Clean the Cover Regularly
Dirt, dust, and debris can accumulate on the cover, causing it to deteriorate faster. To prevent this, you should clean the cover regularly using mild soap and water. Avoid using abrasive cleaners or chemicals that can damage the cover.
Lubricate the Rails
The rails of the Bak Revolver X4S should be lubricated regularly to prevent rust and ensure smooth operation. Use a silicone-based lubricant and apply it to the rails and latches.
Check the Seals
The seals on the cover are designed to keep water and debris out of your truck bed. Inspect them regularly for signs of wear and tear and replace them if necessary.
Tighten Loose Fasteners
Over time, the fasteners that hold the cover in place may become loose. Check them regularly and tighten them if necessary to prevent the cover from moving around and causing damage.
Avoid Overloading the Cover
While the Bak Revolver X4S is designed to handle a significant amount of weight, it is essential to avoid overloading it. Excessive weight can cause the cover to sag and eventually fail.
Store the Cover Properly
If you need to remove the cover, make sure to store it properly to prevent damage. Keep it in a dry, cool place, and avoid stacking heavy items on top of it.
By following these maintenance tips, you can prevent Bak Revolver X4S problems and ensure that your tonneau cover remains in excellent condition for years to come.
Average Servicing Cost of a Bak Revolver X4S?
The BAK Revolver X4S is a popular hard-rolling tonneau cover for trucks. When it comes to servicing the cover, the average cost can vary depending on the specific needs of the truck owner.
Routine maintenance, such as cleaning and lubricating the rails and hinges, can be done by the owner and will not incur any additional costs.
However, if there are any issues with the cover such as a malfunctioning locking mechanism or a damaged cover, it may need to be serviced by a professional.
The cost of this service will depend on the extent of the damage and the location of the service center.
On average, a BAK Revolver X4S cover repair or replacement can cost anywhere from $100 to $500, including labor costs.
Final Thought
Bak Revolver X4S problems are something that you must take into consideration. But they don’t always have to be a cause for alarm.
By being aware of potential problems and how to identify and fix them, you can take a more proactive approach to using and maintaining your Bak Revolver X4S.
Doing so not only ensures that you’re able to keep up and enjoy the usage, but it’s also important for the safety of your family and friends.
Know the signs, take preventive measures, and use the provided solutions as needed to keep your Bak Revolver X4S in tip-top shape.
