You put a lot of time, money, and effort into upgrading your vehicle. And one of the best investments you can make is a Roll N Lock bed cover.
But like anything, there can be issues with these covers. So, what do you do if you encounter Roll N Lock bed cover problems?
Don’t worry! We’ll take a look at some of the common problems that may arise with a Roll N Lock bed cover.
We’ll also try to share some tips to maintain it as well as extend its life. With this information in hand, you’ll be able to keep your cargo safe and sound.
So, why late? Keep reading this article and gain some ideas.
6 Common Roll N Lock Bed Cover Problems and Solutions
Roll N Lock Bed Covers are a popular aftermarket accessory for pickup truck owners.
These covers provide a secure and convenient way to protect the cargo area of your truck from the elements and theft.
But they are not immune to problems. Here, we’ll try to share some of its common problems and solutions as well.
Cover Not Rolling Smoothly
Roll N Lock bed covers are a great way to keep your cargo safe and secure. But what do you do when the cover doesn’t roll smoothly?
The most common causes of a Roll N Lock cover not rolling smoothly are inadequate lubrication, over-tightening of the torsion spring tensioner, and improper loading.
To fix this issue, start by applying lubricant on both sides of the rollers throughout the length of the rail track.
Make sure you don’t use too much lubricant. Just enough to reduce friction. If that doesn’t work, check to see if the torsion springs have been over-tightened or if any uneven loading is causing the bed covers not to roll smoothly.
If none of this works, contact the manufacturer for an expert opinion. Also, take some tips for specific instructions on repairing or replacing it.
Leaking
If you’ve noticed that your Roll N Lock Bed Cover is leaking, you need to take action quickly.
But what actually causes this issue? The most common cause of leaking is a broken or worn rubber seal.
You’ll need to replace the rubber seal, which can be done easily with just a few simple tools.
To prevent future leaks and keep your bed cover in good condition, you can take some extra steps.
Regularly inspect the rubber seal for signs of wear and tear. Also check the area around the seal for any loose screws or fasteners that may be contributing to the leak.
Make sure to clean, lubricate, and inspect your bed cover regularly. It will help ensure it’s running smoothly and without any issues.
Gets Stuck While Retracting
Have you ever had your Roll N Lock cover gets stuck while retracting? It can be a very frustrating experience.
And it’s not something you want to come up against. But what causes the cover to get stuck?
One possible cause of a Roll N Lock cover getting stuck is compressed seals. If the seals near the tailgate become compressed, they can begin to stick together. This makes it hard for the cover to roll smoothly.
This problem can be easy to fix. Just lift up on the tailgate slightly while releasing the strap or t-latch at the cab.
Another issue that might cause your Roll N Lock cover to get stuck while retracting is excessive dirt build-up.
As dirt accumulates on either side of the cover and between its slats, it creates extra drag and prevents the cover from rolling smoothly.
To fix this problem, you should use a soft brush to scrub away any dirt build-up and then apply silicone spray as a lubricant.
You also need to make sure all of your rails are evenly spaced and that they are properly aligned.
If they aren’t, loosen them slightly and use shims or spacers to adjust them into position before retightening them once again.
Cover Not Locking
One of the most common problems people face with their Roll N Lock bed covers is that they don’t always lock properly.
If you’ve experienced this, you know how frustrating it can be. So, it’s important to understand why it happens and how to fix it.
There are various reasons for it. Check out the possible causes of your Roll N Lock cover not locking:
- The locking mechanisms are faulty or damaged.
- The hinges, arms, or other components are bent or broken.
- Corrosion and oxidation have occurred in the latch areas.
- The seal strip is worn down. It allows moisture and dirt to build up in the locking mechanism.
- The latching mechanisms have become frozen due to a build-up of dirt and debris.
But don’t worry! Most of these causes can be addressed with some simple maintenance and cleaning.
Here are some tips for getting your Roll N Lock cover functioning properly again:
- Clean the latching mechanisms using a damp cloth and purge any debris stuck in between the components.
- Use lubricant on all moving parts such as silicone lubricant on rollers and other parts that move freely.
- Replace any broken or damaged components like arms, bearings, etc. for proper functioning.
- Check for corrosion using a wire brush and anti-corrosive spray to remove rust spots and provide additional protection.
- Inspect the seal strip for tears or wear & replace it if necessary.
By following these steps, you should be able to get your Roll N Lock bed cover locking correctly again.
Gets Rust
Do you have a Roll N Lock bed cover that’s susceptible to rust? It’s time to get the facts and learn some possible solutions.
Rust can form on your bed cover if it’s exposed to water and air. So, it’s important to make sure it’s kept clean and dry regularly.
There are some common causes of rust formation. Check them out:
- Moisture getting trapped inside the mechanism – It can be caused by damp weather or poor drainage from the seams.
- Loose screws, nuts and bolts – These parts need to be tightened regularly in order to prevent moisture from seeping in.
- Poorly sealed or damaged seals – If any of your seals are cracked, worn out or insufficiently sealed, they can allow water and moisture in easily.
- Throwing dirt onto the bed cover – Dirt can cause scratches that create tiny pathways for water and moisture to penetrate into the material.
- Using a non-waterproof lubricant – Using non-waterproof lubricants like oil-based products can lead to corrosion and rusting over time, as they degrade when exposed to moisture in the air.
The good news is that preventing rust is actually quite doable. Here are a few solutions for maintaining a rust-free Roll N Lock bed cover:
- Regularly tighten screws, nuts, and bolts – Make sure everything is properly secured so no moisture will get trapped inside them.
- Apply a waterproof lubricant – It will help make sure that any damaged seals won’t become contaminated with water or air when exposed.
- Clean off regularly– It is one of the most important things to do. You need to clean all the parts properly.
Cover Sagging
If you’re noticing that your Roll N Lock cover is sagging, then it’s time to figure out what’s causing the problem and how to fix it.
There are two common reasons responsible for it which are Misalignment and Weight Limit.
If your Roll N Lock cover is not aligned correctly with your truck bed rails, then this could be causing the sagging you’re seeing.
The fixing procedure is very easy. Just readjust the alignment of your Roll N Lock cover and you should be good to go.
Another thing is, the Roll n Lock covers have a weight limit they can hold before they start to sag.
So, if you’re finding that your business has increased and you’re having to add more and more items into your truck bed, check the weight specifications for your Roll N Lock cover. It may be time for an upgrade.
Why It’s Important to Determine Roll N Lock Bed Cover Problems
Are you having problems with your Roll N Lock bed cover? It’s important to identify and address those issues as soon as possible. The problems can worsen if left unchecked.
Not to mention, if you let the problem get worse, it’ll cost a lot more to repair or replace the cover than if it had been attended to earlier.
In order to properly diagnose the issue with your Roll N Lock bed cover, you’ll need to inspect every inch of it closely.
Check for any signs of damage or wear, such as worn fabric or rusting parts. Also, check for any kind of debris that may have become trapped in the mechanism that helps the cover open and close.
How to Maintain Your Roll N Lock Bed Cover
If you own a Roll N Lock bed cover, you know how important it is to maintain it properly.
After all, it’s an investment. Here are a few tips to help you keep your Roll N Lock bed cover functioning properly:
Clean Regularly
Regular cleaning is essential for any bed cover, especially for Roll N Lock. Dust and debris can accumulate quickly and can eventually cause damage to the bed cover.
Make sure you clean the Roll N Lock bed cover with soapy water at least once a week.
Use Protective Products
Spray-on protective products can help protect your Roll N Lock bed cover from UV rays, dirt, and rain. These products are easy to apply and provide excellent protection against damaging elements.
Secure Cover
Make sure that you always secure your Roll N Lock bed cover when it’s not in use. You don’t want it flapping in the wind. It will help keep it protected from any shifting or toppling over during windy days.
Lubricate Moving Parts
Similar to other moving parts of your car, lubrication is essential for keeping the locks on your Roll N Lock bed cover moving smoothly, without rusting over time. This will help extend the life of your Roll N Lock bed cover and keep the locks functioning properly.
Don’t Overload It
Your Roll N Lock doesn’t have an infinite weight capacity. Be sure not to overload it with heavy items as this can cause strain and eventual damage down the road.
How to Extend Life of Your Roll N Lock Bed Cover
Maybe you’re not having any problems with your Roll N Lock bed cover yet. But what if you want it to last and perform at the highest level for years to come?
That’s where maintenance comes in and there are several ways that you can extend the life of your Roll N Lock bed cover.
Clean Regularly and Keep Moisture Away
A sure way to extend the life of a Roll N Lock bed cover is by cleaning it regularly and keeping moisture away from the fabric.
To do this, simply use a damp cloth to periodically clean off the surface of the fabric, making sure to get into all the creases and corners.
Then let it air dry naturally, and make sure that water isn’t pooling on top of the fabric when it’s closed. Doing this will prevent mold from growing on or around your Roll N Lock bed cover.
Lubricate Moving Parts
The moving parts of your Roll N Lock bed cover need lubrication every now and again in order to stay in top shape and keep things running smoothly.
Use a silicone spray or any other non-staining lubricant on all moving parts. It will help keep problems away while also helping ensure that your bed cover opens easily each time.
Inspect Your Bed Cover Regularly
Once or twice per month it is important to inspect your bed cover for wear and tear using a flashlight.
This can help you identify any problems before they arise, such as broken hardware or fraying fabric, so that you can take proper action before they become bigger issues down the road.
Avoid using High-Pressure Washers
High-pressure washers can cause damage to the Roll N Lock bed cover’s material, locking mechanism, and hinges. The high pressure can cause the material to tear or warp and damage the locking mechanism and hinges. Instead, use a garden hose with a low-pressure nozzle to clean the cover.
What is the Average Costing for Servicing Roll N Lock Bed Cover Problems?
The cost of servicing Roll N Lock bed cover problems can vary depending on the specific issue and the location of the repair shop.
On average, the cost of repairing Roll N Lock bed cover problems ranges from $50 to $500.
It is recommended to contact a certified Roll N Lock dealer or repair shop to get an accurate estimate of the cost of servicing your bed cover.
Regular maintenance and proper care of your Roll N Lock bed cover can help prevent potential problems and save you money in the long run.
Final Thought
Roll N Lock bed covers are a great way to keep your cargo secure and out of the elements. But, like any product, they can run into problems from time to time.
We’ve explored some of the key Roll N Lock Bed Cover problems that may arise and offered some solutions. Ultimately, it’s important to remember that preventive maintenance can go a long way.
Keeping your Roll N Lock bed cover clean and properly lubricated will go a long way towards preventing any problems that may arise.
Also, if you experience any issues, be sure to address them as soon as possible. That way, you can keep your Roll N Lock bed cover running smoothly and reliably for years to come.